DC KUNKLE Bass Neck Baritone Conversion Vi Scale Std 30.25 125

( Brand: Dc Kunkle ), ( Model: T STYLE 30.25 LONG SCALE BARITONE/ BASS IV ), ( Part Type: Baritone Scale ), ( Country Of Manufacture: United States )

Review DC KUNKLE Bass Neck 125 Baritone Conversion Vi Scale Bin Std Long

The 30.25 bass Kunkle neck is a high-quality addition to any musician's arsenal. This neck, specifically designed for a 125 baritone guitar, features a unique scale length of 30.25 inches. This scale length is ideal for producing a rich, full-bodied sound that is perfect for bass-heavy music genres.

The neck is made of Kunkle's proprietary materials, ensuring a perfect balance of strength and flexibility. The tonewood used in the construction of this neck is carefully selected for its superior tone and resonance, ensuring that every note played has a deep, rich sound.

The neck is equipped with a VI scale, which is a modified version of the traditional 24 fret scale. The VI scale offers a unique blend of playability and tone, with a slightly wider string spacing that makes it easier to play complex chords and solos.

This neck is also designed to be easily converted to a baritone configuration. The 125 baritone tuning is perfect for players who want to explore the lower end of the frequency spectrum, and the Kunkle neck is specifically designed to handle the additional string tension and weight that comes with a baritone setup.

The Kunkle neck is finished with a standard binding, which not only adds a touch of elegance to the neck but also helps protect the edges of the fretboard from wear and tear. The finish is smooth and comfortable to the touch, allowing for easy and precise fret hand movement.

Overall, the 30.25 bass Kunkle neck is a versatile and high-quality addition to any baritone guitar. With its unique scale length, modified VI scale, and baritone conversion capability, this neck is perfect for musicians who want to explore the lower end of the frequency spectrum while still maintaining a high level of playability and tone.

1. Versatility: This conversion kit allows you to transform your existing 34" scale bass into a 30.25" baritone with a lower B-Standard tuning, expanding the range of sounds you can produce.

2. Quality craftsmanship: Kunkle Necks are known for their high-quality construction and attention to detail, ensuring a comfortable playing experience.

3. Vi Scale: The Vi Scale (25.5" scale length) is a popular choice for bass players due to its balance between playability and tone, providing a smooth and responsive playing experience.

4. Standard Tuning: The B-Standard tuning (BEADGBE) offers a more traditional tuning for baritone guitars, making it easier to learn and play for those who are familiar with standard tuning.

1. Cost: Conversion kits like this can be more expensive than purchasing a complete baritone guitar, as you'll need to factor in the cost of your existing bass and the conversion kit.

2. Requires knowledge and skills: Installing a conversion kit requires some degree of guitar repair and modification skills, so you may need to seek out professional help or do some research to ensure a proper installation.

3. Not for everyone: Baritone guitars have a unique sound and feel, and not every bass player will find it appealing or necessary.

If you're looking to add some versatility to your existing bass and explore the world of baritone guitars, the 30.25" Bass Kunkle Neck 125 Baritone Conversion with Vi Scale and B-Standard Tuning could be a great option. However, keep in mind the cost and potential difficulty of installation, as well as whether or not you'll find the sound and feel of a baritone guitar appealing.

I would recommend this conversion kit to intermediate to advanced guitarists who have some experience with guitar repair and modification, and are looking to expand their tonal palette by trying out a baritone guitar sound. For beginners or those without the necessary skills, it may be worth considering purchasing a complete baritone guitar instead.

Details:

A quick grip clamp with the soft rubber pads. When the torque to twist the nut becomes greater than to twist the rod, the rod will twist. I also use this method to the holes for the tuners as well.

I use paint thinner mineral spirits, on the hard finishes lacquers urethane's and such. In rock maple the drill bit should be no smaller than the shank of the screw. Be careful, even mineral spirits will swell up the raw wood. The benefits of the rod from the back is you can have more bow in the rod verses from the top.

On softer wood, you can go smaller, but not the hard maple. If the brass nut doesn't strip, the rod will twist until it snaps usually at the anchor retch guitars are famous for this. Before I do a string change, i'll check the relief to see if it needs to be adjusted if it needs to be, I will snug it up a little when the strings are off the rod from the back is the easiest and fastest way to install the rod. A digital caliper optional to start, fit your neck to the body, with the body lying flat on a table, or other flat surface, support the neck so it lays flat in the neck pocket, with a yard stick, check the alignment of the neck to the bridge, hold your yard stick along the edge of the neck, from the nut down past the bridge, if your bridge mounting screw holes are drilled, you want the yard stick to be equal distance from the edge of the outside two holes.

With a digital caliper, measure between the threads on your screw, your drill bit should be no smaller then that measurement, but rather, the same size.

You re now ready to mount your neck. The Gibson rod adjust easier, but uses more tension and is always under tension as compared to the deeper rod and seems to move more in different climates. The truss rod single action single rod.

I dry sand right up to were I get ready to buff i've had o issues with back bow after changing to this arrangement. What I do is snug up the rod, don't over tighten. When I drop the tension back off the rod, I will have between.

Put the appropriate size drill bit in the drill, at this time. If you are setup for the one piece neck and want to put a cap on the top you can still come from the back to install the rod. Be most careful around end grain the very back of the neck, front of the peg head, and especially the tuner holes. Tighten the chuck on the drill, and double check that the length is still right.

The thinner the neck, the shallower the truss rod bow. What I like about it is it seems to need less maintenance then the shallower rod, like the Gibson's. Go through the mounting hole in the body, keeping the drill bit centered in the hole.

When you re done with all four, remove the drill bit. The cap is 1/4 or less usually and that lowers the available thickness to work with. After it is trued, I remove it from the fixture, it will have a slight back bow positive bow.

Put one of the screws along the cutout to see how far into the neck it will go, look to see that it won't go too far, then place the screw alongside the drill bit in the drill, adjust the exposed length of the drill bit so it only sticks out the length of the screw. The finish these necks come standard with two coats of nitrocellulose lacquer, this will hold up well with moderate usage, you can apply more, just sand lightly with 320 grit dry. That's when the trouble starts.

A reversible drill, It takes a little bit more time to adjust, tune, de tune, adjust, tune, check, but done right, you should't need to readjust for quite some time. I tape this area off, and dry sand it after everything else is done. Not nearly as badly as water, but it will swell.

I have a lot less problems that way. Tighten just enough to where the rod doesn't rattle. Note the gap in the neck pocket at the upper end, place a shim of the appropriate thickness at that point.

What you don't want to do is wet sand between coats, raw wood will suck it up like a sponge, swelling, cracking, twisting, and all kinds of ugly stuff. If your going to use anything other then nitrocellulose lacquer, the original finish should be competently removed why you ask, because the tuner holes are almost all end grain, hard to get enough finish applied to seal it from moisture any kind of moisture. Always adjust the truss rod with the strings off, or way loose.

Drill your mounting holes. I then put a slight load on the rod and sand it true using a edge sander setup horizontally, similar to a stroke sander but not a stroke sander.

This way I true the f b to the way the truss rod acts with the neck.

part #: 3025 prices

• $170.00-$205.00

specifications necgui:

• brand: Dc Kunkle
• model: T Style 30.25 Long Scale Baritone/ Bass Iv
• part type: Baritone Scale
• country of manufacture: United States

Ratings:

1. A++ THANK YOU 08-07-16
2. XLNT, great neck, fast shipping, safe packing, will deal again, AAA+++ 08-10-16
3. Perfect fit and intonation. Fast shipping thank you! 08-07-16
4. All Good, Thanks for the Business. 08-15-16

Offer necgui:

• quantity: 1
• # Sold: 0
• # bids: 0
• best offer: false
• Started: August 15, 2016, 7:20 am

Seller necgui:

• zipcode: 89403
• city: Dayton, Nevada

General necgui:

• in stock: Yes
• Musical Instruments & Gear > Guitars & Basses > Parts & Accessories > Guitar Parts > Necks
• condition: New

Returns necgui:

• policy: returns accepted
• time: 14 Days
• details: Items must be returned in same condition as arrived, any alterations to will void returns. Item will not be sent back to buyer until return shipping is paid through PayPal, no exceptions.
• type: Money back or exchange buyer's choice
• paid by: Buyer

Payments necgui:

• PayPal

Shipping necgui:

• type: Calculated
• handling: 15 days

Dc Kunkle 30.25 Is Similar To:

• 28.629 Style Baritone Dc Kunkle Std Scale S Guitar Neck Buy It Now At 110.00 (54.9% similar) 1ST, if it arrives with obvious damage, refuse it, return to sender, let me handle it. Why you ask, because the tuner holes are almost all end grain, hard to get enough finish applied to seal it from moisture any kind of moisture thick at the first fret comes with no mounting holes, for an extra ...(August 19th, 2016)